핵심 요구사항
- AutoCAD / AutoCAD Electrical 기반 전원·제어 회로 스키매틱 작성
- IEC 심볼 및 사내 레이어·타이틀블록·리비전 표준 준수
- 공급된 PLC I/O 리스트와 일치하는 디바이스 태그 및 일관된 와이어 넘버링
- BOM / 부품 리스트 작성 (Excel 또는 임베디드 테이블)
- 레드라인 없이 내부 체크 프린트 통과
- IST 근무시간 협업 가능(선호), 빠른 리비전 대응
Required stack
필요 기술
AutoCADAutoCAD ElectricalPLCElectrical EngineeringIEC SymbolsControl SystemsAutomationEngineering Drawing
Project brief
프로젝트 내용
I have a steady stream of PLC-, HMI- and automation-based projects that need crisp, production-ready drawings. Right now my top priority is a complete set of power and control circuit schematics for an automation panel. All work must be prepared in AutoCAD or AutoCAD Electrical, following the IEC symbols and my in-house layer, title-block and revision standards.
You will receive the PLC I/O list, brief control philosophy and preferred part numbers. From that, I expect a clean schematic package plus the supporting documents that let my panel fabricator move straight to wiring.
Deliverables
• Power & control circuit schematics (DWG)
• Corresponding BOM / component list (Excel or embedded table)
Acceptance criteria
The drawings must match the supplied I/O list, reference all device tag numbers, use consistent wire numbering, and pass an internal check print without red-lines.
Familiarity with MCC, PCC, GA layouts, cable schedules and terminal plans is a bonus because future jobs will extend into those areas, but this first assignment is limited to the items above.
I’m Pune-based, so the ability to discuss details during IST working hours is helpful, though remote collaboration is fine. If you bring strong AutoCAD Electrical skills, a solid grasp of PLC wiring practices and can turn revisions quickly, let’s get started.
You will receive the PLC I/O list, brief control philosophy and preferred part numbers. From that, I expect a clean schematic package plus the supporting documents that let my panel fabricator move straight to wiring.
Deliverables
• Power & control circuit schematics (DWG)
• Corresponding BOM / component list (Excel or embedded table)
Acceptance criteria
The drawings must match the supplied I/O list, reference all device tag numbers, use consistent wire numbering, and pass an internal check print without red-lines.
Familiarity with MCC, PCC, GA layouts, cable schedules and terminal plans is a bonus because future jobs will extend into those areas, but this first assignment is limited to the items above.
I’m Pune-based, so the ability to discuss details during IST working hours is helpful, though remote collaboration is fine. If you bring strong AutoCAD Electrical skills, a solid grasp of PLC wiring practices and can turn revisions quickly, let’s get started.
지원 기회 분석
지원 전에 볼 것
예상 산출물
- 전원 및 제어 회로 스키매틱 도면 (DWG)
- BOM / 부품 리스트 (Excel 또는 임베디드 테이블)
매력 포인트
- 명확한 스펙과 인수 기준
- 향후 프로젝트로 이어질 수 있는 장기 협업 가능성
- 안정적인 프로젝트 파이프라인 언급
확인할 점
- 예산 통화 표기 불명확 ($와 INR 혼용으로 실제 예산 규모 애매)
- 기간 명시 없음
Client signal
클라이언트 정보
플랫폼에서 상세 정보를 확인하세요.