핵심 요구사항
- 컨셉 스케치 기반 3D 지오메트리 생성/정제
- 경질석재용 공구 및 절삭 파라미터 정의
- 황삭·정삭·디테일 가공 전략 수립
- RichAuto A18 호환 G코드 생성
- 플러그 구조 내부의 양방향 가공 및 로터리/볼 공구 활용
- work-holding 및 쿨런트 권장사항 작성
Required stack
필요 기술
Fusion 360CAMCNC Programming3D Modelling3D CADSTEP/STL
Project brief
프로젝트 내용
I need a complete Fusion 360 workflow prepared for a new stone-based product I’m developing. The goal is to receive a clean 3D model along with CAM tool-paths that I can load straight into my stone CNC machine.
Scope
• Create or refine the 3D geometry in Fusion 360 to match my concept sketches (I’ll share them once we start).
• Set up the manufacturing workspace, define all required tools and cutting parameters for hard stone.
• Generate roughing, finishing and detailing strategies so the part comes off the machine ready for minimal hand polishing.
• Hand back the .f3d file plus an exported NC file and a brief note on work-holding and coolant recommendations.
I’ll need:
STEP file
STL file
Separate G code compatible with RichAuto A18 controller.
Tooling list and machining setup instructions
If you have prior examples of stone machining in Fusion 360, that will speed up our collaboration.
We are using a 6090 stone cnc with a 5.5KW spindle. We have a rotary attachment. It has vertical motion only so side cutting, ball attachments will be required for internal areas.
You will notice that the jug has a plug. This is so we can access the internal areas of the jug. It will need to be machined from both ends for the internal.
This is one of many projects we will be creating.
Scope
• Create or refine the 3D geometry in Fusion 360 to match my concept sketches (I’ll share them once we start).
• Set up the manufacturing workspace, define all required tools and cutting parameters for hard stone.
• Generate roughing, finishing and detailing strategies so the part comes off the machine ready for minimal hand polishing.
• Hand back the .f3d file plus an exported NC file and a brief note on work-holding and coolant recommendations.
I’ll need:
STEP file
STL file
Separate G code compatible with RichAuto A18 controller.
Tooling list and machining setup instructions
If you have prior examples of stone machining in Fusion 360, that will speed up our collaboration.
We are using a 6090 stone cnc with a 5.5KW spindle. We have a rotary attachment. It has vertical motion only so side cutting, ball attachments will be required for internal areas.
You will notice that the jug has a plug. This is so we can access the internal areas of the jug. It will need to be machined from both ends for the internal.
This is one of many projects we will be creating.
지원 기회 분석
지원 전에 볼 것
예상 산출물
- .f3d 파일
- STEP 파일
- STL 파일
- RichAuto A18용 NC/G코드
- 공구 리스트 및 머시닝 셋업 지침
매력 포인트
- 요구 산출물과 장비 사양이 구체적으로 명시됨
- 반복 프로젝트 가능성(장기 협업 여지)
확인할 점
- 예산($30~250 AUD)이 전문 CAM 작업 난이도 대비 매우 낮음
- 컨셉 스케치를 시작 후에야 공유하여 범위 산정 어려움
- 'one of many projects' 언급으로 저단가 장기 유도 가능성
Client signal
클라이언트 정보
플랫폼에서 상세 정보를 확인하세요.