INTL
Freelancer
보통
외주
원격 가능
Tekla/Steel Fabrication Expert for Minor Updates to existing steel fabrication drawings
예산
$30~$250 CAD
예상 기간
1~2주
난이도
보통
기술 스택
Tekla Structures
AutoCAD
Solidworks
3D Modelling
CAD Drafting
Structural Engineering
Mechanical Engineering
3D CAD
AI 분석 요약 기회점수 52/100
기존에 준비된 구조용 강재 제작 패키지(3D 모델과 제작 도면)를 검토하고 소규모 수정 작업을 수행하는 프로젝트입니다. 구조 엔지니어가 제공한 도면과 연결 상세를 비교하여 플레이트, 볼트, 용접, 스티프너 등의 누락되거나 잘못된 세부사항을 수정·보완하고 관련 도면과 모델 데이터를 업데이트해야 합니다. 신규 설계가 아닌 기존 파일의 마이너 수정 및 마무리 작업으로, Tekla Structures 등 강구조 제작 도면(BIM) 경험이 있는 기계/구조 엔지니어에게 적합합니다.
핵심 요구사항
- 기존 3D 모델과 제작 도면 검토
- 엔지니어 제공 도면과 연결 상세 비교
- 플레이트·볼트·용접·스티프너 등 연결 상세 수정/추가
- 도면 및 모델 데이터 업데이트
- 제작에 적합하도록 최종 패키지 일관성 확보
산출물
- 수정된 제작 도면(fabrication drawings)
- 업데이트된 3D 모델 데이터
- 제작용 최종 패키지
매력 포인트
- 명확하고 제한된 작업 범위
- 기존 파일·도면·RFI 자료 제공
주의사항
- 소규모 수정이라지만 구조물 안전과 직결되는 연결 상세 작업이라 책임 범위가 모호함
- 예산 폭($30~250 CAD)이 넓고 낮은 편이라 실제 작업량 대비 저평가 위험
프로젝트 유형유지보수
적합 개발자강구조 제작 도면(Tekla) 경험 3년 이상 구조/기계 엔지니어
클라이언트 정보
지원자9명
평균 입찰가$108
프로젝트 원문 설명
We need an experienced mechanical or structural engineer to review an existing structural steel fabrication package and complete a few minor revisions. The main 3D model and fabrication drawings have already been prepared.
The remaining work is limited to checking the package against the supplied structural-engineer drawings and updating any minor missing or incorrect details required by the fabricator.
Expected tasks: -Review the existing 3D model and fabrication drawings. -Compare the connection details with the supplied engineer’s drawings.
-Make minor corrections or additions to plates, bolts, welds, stiffeners, and connection details where required.
-Update the relevant drawings and model data. -Ensure the final package is clear and consistent for fabrication.
This is not a new design project or a complete structural modelling assignment. Only minor revisions and finishing work are expected. The existing files, drawings, and RFI information will be provided.
The remaining work is limited to checking the package against the supplied structural-engineer drawings and updating any minor missing or incorrect details required by the fabricator.
Expected tasks: -Review the existing 3D model and fabrication drawings. -Compare the connection details with the supplied engineer’s drawings.
-Make minor corrections or additions to plates, bolts, welds, stiffeners, and connection details where required.
-Update the relevant drawings and model data. -Ensure the final package is clear and consistent for fabrication.
This is not a new design project or a complete structural modelling assignment. Only minor revisions and finishing work are expected. The existing files, drawings, and RFI information will be provided.
Freelancer에서 원본 확인
원본 보기